My DIY Oak L Rod Drum Mounting Bracket - 10

Drilled the top two holes first and bolted the two plates together that way every thing will stay aligned while I drill the remaining holes.  3/16" for the corners and 1/2" for the center hole. I used the top plate as a template to drill 3/16" holes in the oak piece.

Bolted the top plate, oak and bottom plate together.

Drilled hole in knob and added the 1/4" bolt and locknut. Update: I now use Socket Head Cap Screw Part # 91251A542 and Knobs Part # 94052A141 You can find at http://www.mcmaster.com

Drilled 9/32" holes to mount the mounting bracket to the drum.

Next I will be converting my acoustic drum kit to electronic.

Diy Tutorials

DIY Mesh Heads

DIY Oak L Rod Mounting Brackets

Acoustic to Electronic conversion

Convert Yamaha DD-55 Drum Module

Hardware Store 10" or 12" Bucket Drum

Wood hoops

Wood cymbals for bucket drum kit

Mini Bucket Drum

Wood L-Rod Rack Clamp

DIY Rock Band Drum Kit

Rock Band controller

DIY Rock Band drum rack

How to setup drum kit

Video playing Rock Band on DIY mesh drums

Rock Band Store

Photo Gallery

E-drum Resources
 
Vdrums.com
Great Info for V-Drum Users.

VDrumLib
VDrumLib is a sysex librarian that enables the creation of personal drum kit libraries for your Roland V-Drum module